Student accomplishments
Paper Publications by Students:
- D. Jitesh Krishna, S. Kavya Geetika: Modelling and Analysis of Disc Brake Mounted on the Axle of a Train, International Conference on Computational Methods in Manufacturing March 2019, IIT Guwahati
- D. Jitesh Krishna, S. Kavya Geetika: “Modelling and Analysis of Disc Brake Mounted on the Axle of a Train”Indo Japan Bilateral Symposium on Futuristic Materials Manufacturing, IIT Madras during 16th -17th July. This is a very prestigious conference, jointly organised by IIT Madras and Ministry of Education, Japan.
- S. Kavya, D. Jitesh Krishna:“Modelling and Analysis of Disc Brake Mounted on the Axle of a Train” at National Conference on Advances in Mechanical Engineering and Nanotechnology (AMENT-2018) during 29th-30th, June, 2018
- Yashasvi Achanta, Sandeep Dasari:“Progressive Damage Analysis of Laminate Composites” at the International Conference On Emerging Trends in Engineering held on 22-23 March, 2019, University College of Engineering, Hyderabad
- Sandeep Dasari:“Xylitol Based Phase Change Material with Graphene Nano Platelets as Fillers for Thermal Energy Management” at the International Conference On Emerging Trends in Engineering held on 22-23 March, 2019, University College of Engineering, Hyderabad
- Sandeep Dasari:“Sensitivity Study of the Parameters Affecting Pressure Recovery in a Two Stage Jet Pipe Electro Hydraulic Servo Valve” at the International Conference On Emerging Trends in Engineering held on 22-23 March, 2019, University College of Engineering, Hyderabad
- Ishaq Mohammed Iqbal: “Experimental Study and Artificial Neural Network Modelling of Machining with Minimum Quality Cutting Fluid” at the International Conference of Material Processing and Characterisation, 8th-9th March, 2019
- Ishaq Mohammed Iqbal: “State of Art On Zirconia Toughened Alumina” at the International Conference of Material Processing and Characterisation, 8th-9th March, 2019
Internship:
Participation in National Level Events:
- SAE SUPRA 2019: A team of 25 students will be participating in a event wherin they have to design built fabricate a racing car and race with fellow students in buddh international circuit, Greater Noida, Uttar Pradesh. The captain is Mr Jitesh Reddy and Faculty Advisor Dr V Uma Maheshwar.
- SAE AERO DESIGN 2019: Three teams of seven members each are participating this event to be scheduled in the month of july in Chennai.
- Efficycle 2018: Efficycle is a 3 wheeled vehicle driven by both Human and electric power. It is an event conducted annually by SAE India during the month of October, a team (Technocrats) of ten 2nd year students represented department. This year captain was Akash from 2nd year. The vehicle was placed at 37th position.
- Efficycle 2019: Efficycle is a 3 wheeled vehicle driven by both Human and electric power. It is an event conducted annually by SAE India during the month of October, a team (Technocrats) of ten 2nd year students represented department. This year captain is Aravind from second year. Two students from EEE dept are participating apart from department students.
- Efficycle-2017: Efficycle is a 3 wheeled vehicle driven by both Human and electric power. It is an event conducted annually by SAE India during the month of October, a team (Technocrats) of ten 2nd year students represented department. They designed, Fabricated efficycle at the garage facility available in the dept. team consisted of Abhinav, Srinivas, Abhijeet, Abhiram, Wong, Vaibhavi, Jahnavi, Vihasit, Ramya, pavan venkat . The event was organized by SAE India and conducted at lovely professional university, Punjab. The faculty advisor for the event was Mr E. Madhusudan Raju.
- BAJA-2016: A team of 25 aspiring students spanning from those in second year to fourth year have taken part in the most sought after Engineering design competition, "BAJA SAE INDIA 2017" held in Pithampur , Indore , Madhya pradesh in February , 2017 under the fitting name of "Dirt Rider" with the ever supporting, Mr. V. Uma Maheshwar as their faculty advisor. As a part of the competition they've designed , fabricated and tested a single seater, four wheeler "All Terrain Vehicle (ATV)". They've managed to secure 108th position overall in the competition out of 450 participating teams from across the country. Better still, they secured 3rd position in the country for their business presentation in the same competition.
- GOKART-2016: An aspiring team of 20 boys from the second and third year named “TEAM ASPHALT”, have taken part in the India’s biggest karting championship, “NATIONAL KART RACING CHAMPIONSHIP(NKRC)- 2016” held at ‘Mohites Racing Academy’, Kolhapur, Maharashtra on 29th September, 2017 with Mr. V. Uma Maheshwar as their faculty advisor. As a part of the championship they’ve designed, analyzed and fabricated a Go-kart named “ASPHALT V3” .They’ve managed to secure 60th position overall in the competition out of 175 participating teams from across the country
- Electric Solar Vehicle Competition: Team Helios participated on ESVC event conducted at Vishnu engineering college , Bheemvaram AP in the month of April 2017 orgainsed by Imperial society of innovative engineers. The team ended up as on among top 30 teams out of total 133 teams which participated and also won Go Green award. 25 students from 3rd and 2nd years were part of this team. It had three students from EEE and one student from ECE department. The team consisted of Tarun, joel manohar, noman ahmed, osama, syed yosuffudin, Mustafa, monika, lakshmi, bhanurekha, fayaz, srija, sairam reddy, prasanth, sri charan, karthik, pavan, rubadas, awais, yosouf imitaizauddin, umar baser, balaji(EEE), srivatsava(EEE), avinash (EEE), mohan(ECE)
- Efficycle-2016: Efficycle is a 3 wheeled vehicle driven by both Human and aelectric power. It is an event conducted annually by SAE India during the month of October, a team(Technocrats) of ten 2nd year students represented department. They designed, Fabricated efficycle at the garage facility available in the dept. team consisted of mokshit, jitesh, kavya, divya, saketh, sandeeep, vineeth, vineel, nihar, mahidar. The event was organized by SAE India and conducted at lovely professional university, Punjab. The faculty advisor for the event was Mr V Uma Maheshwar.
- GOKART 2014-15 : 25 students of 2nd and 3rd year participated in BAJA-GO KART 2015, Team ASPHALT X -125 secured 9th position overall and 5th in endurance test in NKRC (National Kart Racing Championship) held at Bhopal in January 2015.
List of Industrial Visits by Students
S.No. |
Name of Industry |
Dates |
Impact Analysis |
1 |
ARDEE Industries for fabrication of chasis Supra 2019 vehicle |
March-April 2019 |
Students understood important of Practical |
2 |
Vama Industries for fabrication of SAE BAJA 2017 |
May - June 2017 |
Students understood important of Practical considerations in design |
3 |
Industries in balanagar for fabrication of SAE Aero design vehicle |
March –April 2019 |
Students understood important of aerodynamic structure and difficulties in fabricating these structures |
4 |
NFC,HYD |
16/4/2018 |
Students gained Knowledge on nuclear equipment , NDT techniques and various Processing techniques |
5 |
BHEL R&D,Ramachandrapuram |
23/11/2017 |
Various turbomachinery plants , automatio plants and production plants and the machinery in each plant is studied |
6 |
Jayashankar Agriculture University,Rajendranagar |
07/03/2018 |
Mechanical equipment and its automated and semi automated models used for agriculture are studied |
7 |
CITD, Balanagar |
05/04/2017 |
Metrology equipment along with Precise manufacturing techniques were studied |
8 |
CIPET |
27/8/2016 |
Various |
9 |
CITD, Balanagar |
02/07/2015 |
Various mechatronic devices and electric, hydraulic and pneumatic controls are studied |
10 |
Vama Industries Pvt Ltd.& |
05/09/2016 |
The drilling Rigs used for boring for water supply , the whole unit assembly and individual manufacturing units were visited |
11 |
Infosys, Pocharam Campus |
19/08/2017 |
students visited Infosys campus and the gained Knowledge on various branches involving corporate sector |